Specifies which part is to be positioned in the assembly. This button is active when adding a relationship to a part that already exists in the assembly, or when placing a subassembly. This button is inactive when placing a new part in an assembly.

Specifies which element is to be used on the part being positioned in the assembly.

Specifies which part in the assembly the placement part is to be positioned with. You can select any part in the assembly.

Specifies which part element in the assembly the placement part element is to be positioned with.

Orients the part in the assembly using the position you defined.

Sets the offset type to floating. With a floating offset you can use another assembly relationship to define the offset value.

Sets the offset type to fixed. With a fixed offset you can type a value in the Offset Value box. You can edit this value later.

Sets the offset type to be a range. The range is defined by two offset values. Movement is limited by the distance defined.

Sets the distance the part is offset from the adjacent part in the assembly. This option is available when you are using a fixed or range offset. You can type a positive or negative number. This option is not available with the axial align relationship. When using range offset, two values will define the range.

Repositions the part to the opposite side of the face by changing the planar align relationship to a mate relationship. This option is available only when editing the position of a part.