Contour Flange Options
Displays the Contour Flange Options dialog box so you can set the flange construction options.
Symmetric Extent
Applies half the extent distance to each side of the profile. This button is displayed on the QuickBar when the Extent step is active.
Partial Flange
Creates a flange along a single face from the sketch location extended in a user-defined direction and distance.
Keypoints
Sets the type of keypoint you can select to define a feature extent or to position a new reference plane. Use this to define the feature extent or the location of the reference plane using a keypoint on other existing geometry. The available keypoint options are specific to the command and workflow you use.
|
|
Selects any keypoint. |
|
|
Selects an end point. |
|
|
Selects a midpoint. |
|
|
Selects the center point of a circle or arc. |
|
|
Selects a tangency point on an analytic curved face such as a cylinder, sphere, torus, or cone. |
|
|
Selects a silhouette point. |
|
|
Selects an edit point on a curve. |
Select
Sets the method of selecting a sketch element.
Single—Selects one or more individual elements.
Chain—Selects an endpoint connected set of elements by selecting one of the elements in the chain.
Material Table
Displays the material table that defines the global value for material thickness, bend radius, and bend relief. This option is only available when creating a simple contour flange.
