Text
Sets text options for a dimension.
Font
Sets the font type for the dimension text.
Font Size
Sets the size for text in a dimension.
Tolerance
Sets the size of the tolerance text for dimensions that are placed when the Dimension Type option is set to Tolerance. The value is a ratio of the dimension text size. For example, if you enter .5, the size of the text for the tolerance value will be half the size of the dimension text.
Preview
Shows you the result of the settings for the Font Size option before you apply it to the text.
Terminator
Sets options for terminators.
Type
Sets the terminator type for all terminators.
Inside Limit
Sets the inside limit for the terminator. The value is a ratio of the dimension text size. This setting controls when the terminators are automatically toggled to the outside of the projection lines.
Limit Arrangement
Sets the text arrangement on limit dimensions.
Symbol Placement
Sets the placement position for the symbol on diameter and radial dimensions and linear dimensions for an arc. You can place the symbol before or after the dimension. You can also hide the symbol.
Stack Pitch
Sets the distance between stacked dimensions. The value is a ratio of the dimension text size.
Coordinate
Sets options for coordinate dimensions.
Common Origin
Sets the symbol type for the common origin on coordinate dimensions. You can set the symbol type to dot, circle, or none.
Text Position
Positions text in a coordinate dimension.
Use Lower Case Multiplication Symbol "X"
Specifies the lowercase x as the multiplication symbol in dimensions.