You can do one of the following procedures:

1. Select individual hole features or use a fence to select a large pattern.

2. Choose the Recognize Hole Patterns command.

3. In the Hole Pattern Recognition dialog box, click the OK button to accept all recognized patterns.

   Note:

   If you do not want to convert the recognized patterns, deselect them and then click the OK button.

1. Choose the Recognize Hole Patterns command.

2. Select individual hole features or use a fence to select a large pattern.

3. Press the Enter key or right-click to accept.

4. In the Hole Pattern Recognition dialog box, click the OK button to accept all recognized patterns.

   Note:

   If you do not want to convert the recognized patterns, deselect them and then click the OK button.