When you open a foreign document, Solid Edge checks to determine if the file being opened contains multiple bodies. If the file contains multiple bodies and you are using a Solid Edge part (.par) template to open the file, a warning dialog box displays. You can continue the translation using the part template or return to the Open File dialog box and open the foreign file with a Solid Edge assembly (.asm) template.

Solid Edge provides options to the translator import option dialog boxes that allow you to control how foreign bodies are translated during import.  You can stitch, group curves, or boolean multiple bodies together. You can also specify if you want to use the imported body as a base feature for your Solid Edge model. You should be careful when you select these options to ensure you get the desired results.

If you select the Stitch on Import option, Solid Edge unites the multiple surfaces or sheets together. It may be to your advantage not to stitch on import, but to evaluate what you need to stitch, and perform the stitch after you import the file to Solid Edge.

If you select the Group Curves in a Single Part Copy option, Solid Edge consolidates the curve data into a singe part copy. This is very similar to what the Stitch on Import option does to surfaces. You might want to identify the curves that you do not need and hide or delete them before you import the file.  This helps to control the amount on unused geometry in your imported file.

If you select the Boolean on Import option, Solid Edge unites the multiple bodies into a single part copy.

If you select the Create Base Feature option, Solid Edge uses the imported solid body as the base feature for the Solid Edge model. If there is more than one solid body in the file, no base feature is created. In this case you can use the Make Base Feature command to select a solid to use as the base feature or construct a new base feature for the model.

If you clear this option, all solid bodies contained in the file you are importing are placed in PathFinder as a part copy rather than a body feature. Inserting bodies as a part copy requires you to select or create a base feature.

Since a base feature is not always created automatically, you need to be able to distinguish between the different geometry types. Symbols in the left column of PathFinder tell you the different geometry types included as a part copy. The following table explains the symbols used in PathFinder:

	Solid geometry
	Curve data
	Surface or sheet data

When you open and save a STEP, IGES, or X_T document in the Teamcenter or Solid Edge SP managed environment, the file name is modified to correspond with the Item ID as a part of the translation process. The resulting Solid Edge file is added to the same Item ID as the original foreign file. The Dataset Name is set to the default based on the business rules in place for the Dataset Name, and is updated when other key fields such as the Item Name or Document Name change. Indirect documents that are part of an assembly are assigned new Item IDs in the Upload Document dialog box. The Dataset Description automatically updates with the original file name, and the folder and project information is automatically populated for you. A Link Fixup is performed on the newly created files automatically, and your cache only contains the new files.

Dragging a non-managed document into a managed document results in the same behavior. For example, when you select an unmanaged part from the Parts Library tab or the and drag it into a managed assembly, then save it, the Upload Document dialog displays with the values populated for you.

Retranslation occurs when the input file (STEP, IGES, or X_T) is updated and the translated file is reopened in Solid Edge. Any new files require you to assign the necessary attribute information and then save the new documents to the database. Retranslation is always an overwrite condition. All documents are marked for upload.

• Translate Files into Solid Edge

• Open a Solid Edge document

• Open a draft document for viewing and printing only

• Open a managed document

• Open a foreign file in the Teamcenter-managed environment

• Pin and unpin documents to the Recent Document list

• Opening and saving Solid Edge documents

• Open command

• Working with foreign data

• Opening AutoCAD documents in Solid Edge

• Opening IGES Documents in Solid Edge

• Opening I-DEAS Documents in Solid Edge

• Opening Pro/Engineer Documents in Solid Edge

• Opening Parasolid Documents in Solid Edge

• Opening Unigraphics documents in Solid Edge

• Opening STEP Documents in Solid Edge