Label Weld Options dialog box

The user interface in this dialog box is determined by the active Weld Symbols standard. You set the active Weld Symbols standard on the Drawing Standards tab in the Solid Edge Options dialog box. The two standards which are available are ANSI/ISO/DIN or GOST.

Saved Settings

Lists the saved settings. You can select the arrow to recall a previously saved setting. Saved settings are saved to the DraftWeld.txt file, located in the Solid Edge/Program/Templates/Reports folder.

Save

Saves the current weld symbol parameters to a name you define. You can recall the saved setting to place it more quickly later.

Delete

Deletes the selected saved setting.

Cross

Specifies the cross section area for the weld label.

This value, and the length of the labeled edge, are used to compute the theoretical volume of the weld bead.

ANSI/ISO/DIN weld symbol properties

To learn how to build a simple weld symbol, see Example: Define a weld symbol.

Field/Site Symbol

Specifies a flag points right symbol, a flag points left symbol, or none.

All Around Symbol

Specifies the all around symbol or none.

Weld Symbol

When selected, displays a list of weld type symbols. After selecting the type of weld symbol from the Weld Symbol list, you can use the other weld symbol definition options to define the content and layout of the weld symbol.

Identification Line Symbol

Specifies an identification line above, identification line below, or none.

Intermittent Symbol

Specifies the intermittent symbol or none.

Tail Symbol

Specifies an open tail, a closed tail, or no tail.

Number of

For ANSI/ISO/DIN weld symbols, assigns a weld number operation to the current set of weld options.

Add New Operation

For ANSI/ISO/DIN weld symbols, clears all boxes and increments the operation number.

Operation

For ANSI/ISO/DIN weld symbols, selects and restores the weld options associated with a specific operation number.

Delete Current Operation

For ANSI/ISO/DIN weld symbols, clears all boxes and resets the operation to the previous number.

Reset Current Operation

For ANSI/ISO/DIN weld symbols, clears all boxes but does not change the operation number.

GOST weld symbol properties

The GOST weld symbol has four string input boxes. These input boxes may contain a combination of text and %XX property text codes.

After placing the cursor in a weld symbol input box, you can select the Symbols buttons, Values buttons, or open the Symbols and Values dialog box to insert the appropriate property text codes. The property text codes convert to weld symbols and weld data when the symbol is placed in the document.

Symbols

The Symbols buttons (A) specify the weld symbol type, as well as insert frequently used symbols such as number, diameter, plus-minus, and degree.

Values

The Values buttons (B) extract weld data, such as base thickness, bead length, number of weld beads, and pitch.

Symbols and Values

Opens the Select Symbols and Values dialog box for you to select other symbols and model-derived values without having to type the property text codes yourself.

Field/Site Symbol

Specifies a flag points right symbol, a flag points left symbol, or none.

All Around Symbol

Specifies the all around symbol or none.

Terminator Symbol

Specifies the same side symbol, the other side symbol, or a full arrow head.

Reset

Clears all of the text from the weld symbol boxes, and resets the lines and arrows to the default selection.

Permanent joint

Specifies how two materials are joined together. You can select the Permanent joint check box and then select the type of permanent joint symbol to embed in the leader line.

Show this dialog when the command begins

The dialog can be shown by clicking the Options button on the command bar.

What are you looking for?
How do I
Look up more details