You define drawing view captions and view annotation captions within the drawing view style. As part of this process, you:

Step 1.	Use the Styles command to modify the Drawing View style type, and select the name of the drawing view style that you want to modify.
Step 2.	Define drawing view caption content.
Step 3.	Define view annotation caption content.
Step 4.	Define caption appearance.

When you define your default caption content on the Caption tab in the Drawing View style, you can use the property text and symbol buttons to insert the appropriate codes directly into the Caption box. These codes extract the variable information or display a desired symbol when the drawing view or view annotation is placed.

1. On the Caption tab (Drawing View Style dialog box), from the Drawing View Type list, choose one of the following drawing view types to define a caption:

   • Principal and Pictorial Views

   • Section Views

   • Detail Views

   • Auxiliary Views

   • 2D Model Views

2. From the second list, select the caption type--Primary caption or Secondary caption--and then select the Show check box.

3. In the top portion of the Caption tab--under Drawing View--some standard property text codes and other content is displayed based on the drawing view type you selected. Do the following to define content that you always want to display when a drawing view of the current type is placed:

   1. Delete the content you do not want to keep.

   2. Click the Properties buttons to insert any of the four most frequently used property text codes--Suffix (%AS), Annotation Sheet Number (%LN), View Scale (%VS), and Angle of Rotation (%VR)--into the text box.

      These property text codes reference the Properties boxes at the bottom of the Caption tab.

   3. To add descriptive text, punctuation, or symbols, click where you want to insert it in the caption text, and then:

      • Type plain text.

      • Click the Symbols button to select and insert symbols such as degree or diameter directly into the text using the Select Symbols and Values dialog box.

      • Click the Property Text button to choose property text from sources other than the drawing view using the Select Property Text dialog box.

        Example:

        Selecting From graphic connection as the property text source extracts property values from the model the drawing view depicts.

   4. Click the Show check box.

   Example:

   For Principal and Pictorial Views, you may want to show the view scale and the rotation angle whenever a view is rotated. Do the following:

   1. In the text box, type SCALE=, click the View Scale %VS button , and then press Enter to insert a new line.

   2. Type VIEW ANGLE=, and then click the Angle of Rotation %VR button .

4. At the bottom of the Caption tab--under Properties, do the following:

   1. For each of the property text codes you inserted into the Caption text box, such as %VS and %VR, ensure the appropriate property text strings exist in the Properties boxes, and that the content is what you want to show in the caption.

      • The Properties boxes contain property text strings that derive their values from the drawing view or the view annotation. You can add content to the default property text strings by typing, copying and pasting, and inserting symbols.

        Example:

        Parentheses ( ) are shown around the Annotation Sheet Number and View Sheet Number property text strings. You can delete the parentheses, if you do not want them to appear in the caption. You can add other kinds of text and punctuation by typing it.

      • If you delete the default property text strings in a Properties box, you can use the buttons located at the right side of the box to recreate it.

   2. For each property that you want to include in the caption, select the corresponding Show check box.

For section views, auxiliary views, or detail views, use the middle portion of the Caption tab--under View Annotation--to specify a single line of content that you always want to display in the caption of a source view with a cutting plane line, a viewing plane line, or a detail envelope:

1. On the Caption tab (Drawing View Style dialog box), from the View Annotation Type list, select one of the following:

   • Cutting Plane

   • Viewing Plane

   • Detail Envelope

2. In the Caption box, click the Properties buttons to insert property text codes, or type plain text as you want it to appear.

   You also can use the Property Text button at the top of the dialog box to insert other property text strings, and you can use the Symbols button to insert symbol codes.

3. Click the Show check box.

4. At the bottom of the Caption tab--under Properties, do the following:

   1. For each of the property text codes you inserted into the view annotation Caption text box, such as %VA and %VN, ensure the appropriate property text strings exist in the Properties boxes, and that the content is what you want to show in the caption.

   2. For each property that you want to include in the caption, select the corresponding Show check box.

• Define caption appearance

• Define a view annotation caption

• Define annotation labels

• Create or modify a drawing view style

• Map drawing view styles

• Drawing view style workflow

• Drawing view styles

• Drawing view captions

• View annotation captions

• Styles command