Lists saved hole settings. You can access the saved settings by selecting them from the list. The settings on the dialog box display the characteristics of the hole you select. You can type a name in the box to name a group of settings.

Saves the current settings to the name you type. The settings are stored in an external file named Custom.xml.

For more information on the Custom.xml file and storing commonly used hole parameters, see the Hole command topic.

For more information on the Custom.xml file and storing commonly used hole parameters, see the Hole command topic.

Deletes the saved setting selected in the Save Settings box.

Transfers saved settings from the current document to the Custom.xml file in the C:\Program Files\Solid Edge ST6\Preferences folder. This option is available only when you edit files created before version 16 that also contain saved settings.

Specifies the hole type and defines the parameters for the type of hole you are constructing. The options available in this area are determined by the hole type.

Type

Lists the available hole types. You can specify Simple, Threaded, Tapered, Counterbore, or Countersink holes. When you set the Threaded, Counterbore, or Countersink options, you can also specify the thread type you want.

Unit

Sets the measurement units for the hole. This option controls whether the values used are in inches or millimeters for the hole you are constructing.

Standard Thread

Specifies that you want a standard thread for the hole.

Straight Pipe Thread

Specifies that you want a straight pipe thread for the hole.

Tapered Pipe Thread

Specifies that you want a tapered pipe thread for the hole.

Sets the hole diameter. The list of available hole sizes is stored in an external text file, Holes.txt, which is located in the C:\Program Files\Solid Edge ST6\Preferences folder. You can edit this file to add more hole sizes to the default list.

Sets the taper angle. This option is available when the thread is set to Tapered Pipe Thread.

Sets the thread size. The available thread sizes are based on the hole diameter and thread type you specify. If you change the Thread value, the Diameter box will update to reflect the change. This option is always on for threaded holes.

Specifies that you want the thread to extend the entire depth of the hole.

Specifies that you want the thread to extend a finite depth in the hole.

Specifies the extent depth of the thread. This option is available only for a finite extent thread.

Shows you the result of your settings before you apply them.

Specifies the extent or depth of the hole you are constructing. You can also specify the shape at the bottom of holes that do not extend completely through the part.

Through All

Sets the extent to through all. The hole is constructed through all of the faces encountered on the part.

Through Next

Sets the extent to through next. The hole is constructed through the first exterior face encountered on the part.

From/To

Sets the extent of the hole by specifying two part faces. The entry face does not have to be the face that the hole circle is on.

Finite

Sets the extent to finite.

Hole Depth

Sets the depth of the finite hole you are constructing. This option is available only when you select the Finite Extent option.

V-bottom Angle

Makes the bottom of the hole a V shape. This option is available only when you select the Finite Extent option. You can set the angle for the bottom of the hole. The angle you specify represents the total included angle of the bottom of the hole.

Dimension to Flat

Specifies that the hole depth will dimension to the flat portion of the hole where the v-bottom angle starts. This option is available only when you select the Finite Extent option.

Dimension to V

Specifies that the hole depth will dimension to the v-bottom of the hole. This option is available only when you select the Finite Extent option.

Saves the current settings as the default. Saved defaults will be used the next time you use this command. If you do not save the current settings as defaults, the previous default settings will be used.