You can add symbols and reference data to annotation text and dimension text. When a dialog box such as the Callout dialog box or the Dimension Prefix dialog box provides buttons to do so, you can click the buttons to insert the symbols. In some cases, when the dialog box does not provide a button interface to insert the symbol directly, you can type a three-character symbol code instead.
For many types of annotations, such as text boxes, feature control frames, weld symbols, and hole tables, as well as dimension text and drawing view captions, you can avoid typing symbol codes using the Select Symbols and Values dialog box.
The following tables are organized by category:
The three-character code in the left-most column displays the corresponding symbol shown in the right-most column, or it fetches the matching value from the model. The codes must be typed exactly as listed. They are valid for the Solid Edge ANSI Symbol and Solid Edge ISO Symbol fonts.
Geometric characteristic symbols |
||
Code |
Represents |
Displays this symbol |
%FL |
Flatness |
|
%SR |
Straightness |
|
%CI |
Circularity |
|
%CY |
Cylindricity |
|
%PP |
Perpendicularity |
|
%AN |
Angularity |
|
%PR |
Parallelism |
|
%PS |
Profile of a Surface |
|
%PL |
Profile of a Line |
|
%CR |
Circular Runout |
|
%TR |
Total Runout |
|
%PO |
Position |
|
%CO |
Concentricity |
|
%SY |
Symmetry |
Material condition symbols |
||
Code |
Represents |
Displays this symbol |
%MC |
Maximum |
|
%LC |
Least |
|
%SC |
Regardless of Feature Size |
|
%RC |
Reciprocity Condition |
Tolerance zone symbols |
||
Code |
Represents |
Displays this symbol |
%PZ |
Projected |
|
%TZ |
Tangent Plane |
|
%FZ |
Free State |
|
%ER |
Envelope Requirement |
|
%UD |
Profile Unequally Disposed |
|
%IN |
Independency |
|
%TL |
Translation |
Dimensioning symbols |
||
Code |
Represents |
Displays this symbol |
%DI |
Diameter |
|
%DG |
Degree |
|
%BT |
Between |
|
%ST |
Statistical Tolerance |
|
%CF |
Continuous Feature |
|
%SQ |
Square |
|
%CB |
Counterbore |
|
%SF |
Spotface |
|
%CS |
Countersink |
|
%DP |
Depth |
|
%IL |
Initial Length |
|
%AL |
Arc Length |
|
%PM |
Plus Minus |
|
%AN |
Taper Angle |
|
%A2 |
Taper Angle 2 |
|
%A3 |
Taper Angle 3 |
|
%A4 |
Taper Angle 4 |
|
%SG |
Symmetric Taper Angle |
|
%S2 |
Symmetric Taper Angle 2 |
|
%Gd Note: The second letter is lowercase. |
Material Thickness |
GOST weld symbols |
||
Code |
Represents |
Displays this symbol |
%FW |
Fillet Weld |
|
%HW |
Heat |
|
%HB |
Heat Back |
|
%SW |
Smooth |
|
%SB |
Smooth Back |
|
%SN |
Stagger Chain |
|
%SK |
Stagger Check |
|
%UL |
Not All Around |
|
%NU |
Number |
|
%DA |
Diameter |
|
%PN |
Plus Minus |
|
%DR |
Degree |
Other symbols |
||
Code |
Represents |
Displays this symbol |
%CL |
Centerline |
|
%PT |
Parting Line |
|
%OV |
Oval |
|
%RL |
Rectangle |
|
%RA |
Rotated View (ESKD standard) |
|
%CA |
Rotated View Counterclockwise (GB standard) |
|
%C2 |
Rotated View Clockwise (GB standard) |
Hole references |
||
Code |
Represents |
Fetches this hole data |
%HC |
Hole Callout |
For example, displays hole diameter and depth symbols plus extracted values: |
%HS |
Hole Size |
<Hole Size Value> |
%HD |
Hole Depth |
<Hole Depth Value> |
%BS |
Counterbore Size |
<Counterbore Size Value> |
%BD |
Counterbore Depth |
<Counterbore Depth Value> |
%SS |
Countersink Size |
<Countersink Size Value> |
%SA |
Countersink Angle |
<Countersink Angle Value> |
%TS |
Thread Size |
<Thread Size Value> |
%TD |
Thread Depth |
<Thread Depth Value> |
%ZH |
Smart Hole Depth |
<Smart Hole Value> |
%ZT |
Smart Thread Depth |
<Smart Thread Depth Value> |
Bend References |
||
Code |
Represents |
Fetches this bend data |
%BA |
Bend Angle |
<Bend Outside Angle Value> |
%BN |
Bend Angle Unsigned |
<Bend Angle Unsigned Value> |
%IA |
Included Angle |
<Bend Inside Angle Value> |
%BR |
Bend Radius |
<Bend Radius Value> |
%BO |
Bend Direction |
<Bend Direction Value> |
%BI |
Bend Sequence |
<Bend Sequence Number> |
%BQ |
Bend Quantity |
<Number of Bends> |
Drawing View References |
||
Code |
Represents |
Fetches this drawing view information |
%VA |
View Annotation Name |
<View Annotation Name> |
%LN |
Annotation Sheet Number |
<View Annotation Sheet Number> |
%VS |
View Scale |
<Drawing View Scale Value> |
%VR |
Angle of Rotation |
<Drawing View Rotation Angle> |
%VN |
Drawing View Sheet Number |
<Drawing View Sheet Number> |
Weld Bead References |
||
Code |
Represents |
Fetches this weld bead data |
%TT |
Target Thickness |
<Weld Bead Target Thickness Value> |
%GL |
Gap Length |
<Weld Bead Gap Length Value> |
%BL |
Bead Length |
<Weld Bead Length Value> |
%NB |
Number of Beads |
<Number of Weld Beads> |
%PI |
Pitch |
<Weld Bead Pitch Value> |
Miscellaneous |
||
Code |
Represents |
Does this |
%RT |
Carriage Return |
Inserts a new line. |